The owner of a 30-year-old Thomas skid steer can find plenty of attachments he’d like to use, but its factory coupler won’t take them. With measurements from another Thomas owner and his dad’s Bobcat attachments available to check the fit, he sets out to build a replacement. His dry observation that everybody gets to have their own standard gives the project a funny opening and explains why a perfectly serviceable machine needs so much work.
The clearest technical explanation comes when he compares the Thomas pin arrangement with the angled surfaces and spring-loaded pins of the newer system. He explains how the two wedges draw the attachment tight and are meant to take up play as parts wear. That makes the wooden patterns and test bends more than shop preliminaries. Once viewers understand which surfaces need to meet, they can see why small errors in bending or welding matter.
His decision to buy an aftermarket Bobcat latch kit is especially revealing. A complete kit costs him less than the materials for his own design, so he changes the coupler to suit the available hardware. He cheerfully ignores much the same arithmetic when he decides to build two fork attachments using salvaged parts. The joke lands because he’s candid about what he enjoys making, though the video leaves the total cost of the conversion unclear even as it tallies individual expenses.
The fabrication gains momentum whenever an error forces him to reconsider what he measured. A dimension on the fork frame points to the wrong place, and catching it while the frame is still tack-welded lets him salvage the parts. Later, the bucket’s refusal to latch leads him from a seemingly simple alignment problem to corrosion pushing two plates apart. The diagnosis gives that repair a satisfying progression, although his claim that the material expands by several orders of magnitude goes unexplained.
A leaking cylinder and worn tires help explain why the conversion turns into a broader overhaul. The extended battery troubleshooting and the exchange about a cheap ride to North Dakota are less closely tied to the job, and together they make the middle feel crowded. The host’s dry delivery carries some of that material, but the build is easier to follow when a detour changes what he does at the workbench.
By the end, the bucket fits and the latch works, and the builder is still candid enough to point out where the fork brackets could have fouled the levers. That closing observation gives viewers a concrete design change to consider and makes his original two-week estimate all the funnier. The payoff establishes that the parts fit and latch, with little time spent showing how the finished setup performs under load.
Pros
- The comparison between the Thomas coupler and the double-wedge design makes the attachment geometry easy to follow.
- The wooden patterns and test bends show how the builder checks his design against existing attachments before committing to steel.
- The off-the-shelf latch kit gives the builder a concrete reason to revise his original design.
- The fork-frame correction shows the practical value of checking fit while the assembly is still tack-welded.
- The builder’s explanation of the near miss between the fork brackets and latch levers gives the finished build an honest design appraisal.
Cons
- The extended battery troubleshooting and the North Dakota car exchange slow the conversion story.
- The bucket repair leaves the claimed scale of rust expansion unexplained.
- The scattered prices leave the overall cost of the conversion unclear.
- The ending gives little sense of how the finished setup performs under load.
The Thomas is worth keeping in service because its owner already likes using it, and that affection makes an unexpectedly long fabrication job easy to root for. The result is an engaging workshop story whose most instructive moments come when a part refuses to fit and the builder has to figure out why.












