A Heavy-Lift Drone Earns $750,000 Through Failure, Rebuilding and One Final Push

Rating

Video Reviewed
Rating8.7/10
How I Won $750,000 With this Drone

A 29-pound hexacopter carrying more than 100 pounds is already an arresting engineering proposition, but the real story here is how difficult it proves to keep that machine reliably airborne. The project begins methodically, with a custom thrust-testing rig used to compare motors and propellers while logging thrust, RPM and temperatures. That groundwork gives the technical sections unusual substance: choices such as the MN8017 motor, larger propellers and the truss-based carbon-fiber frame are presented as responses to measured performance rather than arbitrary upgrades.

The development process becomes even more interesting once seemingly successful ideas begin failing. An early frame proves too flexible under load, prompting thicker arms and a stronger hub, while roughly 140 tuning flights reveal how difficult the full 50-kilogram payload is to control. Longer, more efficient propellers reportedly reduce hover power from about 8.1 to 6.9 kilowatts, providing a concrete example of an improvement that matters to the eventual competition attempt. The abandoned 3D-printed wing is equally instructive: it falls off during an autonomous test, a motor shuts down, and the drone lands in water, destroying most of the electronics.

Those failures give the middle of the presentation its strongest narrative momentum. A loose connector causes another major crash, and a subsequent wire failure sends the rebuilt aircraft down again just before the team leaves for Ohio. Rather than treating the wrecks purely as dramatic setbacks, the presentation connects them to design changes: ESC logs identify a disconnected plug, temperature readings expose inadequate motors for hotter conditions, and power data helps determine a new battery configuration. The repeated message that failure produces useful information can become a little motivational, but the engineering examples generally earn that theme.

The competition itself introduces a clear objective and enough uncertainty to sustain the lengthy build-up. Navigation problems prevent an early qualifying attempt, followed by a 3.41 payload-to-weight run that initially places the team second before being disallowed because the landing does not satisfy the required 10-foot-circle rule. A replacement run reaches 3.64, and the decision to attempt the lucrative 4-to-1 threshold naturally raises the stakes. When a motor mount snaps 1.3 nautical miles into that attempt, the overnight rebuild with lighter motors and aluminum motor mounts feels like a genuine last chance rather than manufactured suspense.

The final flight window is particularly effective because small problems keep threatening an otherwise capable machine. A detached GPS forces the first attempt to be aborted, leaving only enough time to recharge the batteries to 80 percent. On the next attempt, an incorrect feet-versus-meters setting nearly prevents the aircraft from reaching the required altitude in time, before the parameter is corrected at 0.48 nautical miles. The eventual failure is more technically revealing: the narrator says uneven motor temperatures led to motor 5 becoming hot enough for its magnets to begin demagnetizing, causing the drone to lose altitude before completing the course. The team therefore finishes second and receives $750,000 rather than securing the larger grand prize.

Presentation-wise, the project benefits enormously from having visible engineering decisions, repeated tests, identifiable failures and measurable competition requirements. There is enough detail about thrust testing, frame construction, tuning, batteries, autonomous flight, temperatures and payload ratios to make the progression understandable without turning the entire piece into a technical lecture. Sponsorship segments for Onshape and mentions of several suppliers are woven directly into the build, although their frequency occasionally makes portions of the project feel promotional. Some technical assertions—particularly component performance and the exact diagnosis of failures—are reported from the team's own measurements and analysis rather than independently established within the presentation, but the extensive testing provides useful context for those conclusions.

Pros

  • The custom thrust rig, extensive tuning and logged temperature and power measurements give the engineering process substantial practical detail.
  • Major crashes are connected to identifiable problems and subsequent redesigns rather than serving only as spectacle.
  • Concrete figures such as payload ratios, hover power, flight speed and competition requirements make the progress easy to follow.
  • The competition provides genuine stakes, including a disqualified qualifying run, an overnight rebuild and two dramatic attempts at the 4-to-1 threshold.
  • The final second-place result preserves the project's credibility by showing how close the design came without pretending the failed grand-prize attempt was a victory.

Cons

  • Repeated motivational observations about perseverance and learning from crashes occasionally state lessons that the engineering story already demonstrates effectively.
  • Numerous sponsor and supplier mentions sometimes blur the boundary between documenting design choices and promoting the products involved.
  • Several technical conclusions about component performance and failure mechanisms depend primarily on the team's own measurements and interpretation.
  • The number of crashes also highlights how late some basic mechanical and electrical reliability problems remained unresolved.

An unusually transparent progression from testing through repeated destruction to a $750,000 second-place finish makes this a compelling engineering competition story. The strongest moments are not the crashes themselves but the measured redesigns that follow them, culminating in a final attempt that fails narrowly enough to demonstrate both the machine's extraordinary capability and its remaining weaknesses.

Recent Reviews